PRODUCTOS
MORTERPLAS PARKING Membrane with polyester felt (FP) reinforcement finished with non-woven polyester felt on the upper side and thermally bonded film on the bottom side.
MORTERPLAS SBS ALU 3KG is a self-protected waterproofing membrane, made of SBS elastomeric bitumen, without reinforcement and finished with 0.08 mm embossed aluminium on the upper side and a thermally bonded film on the lower...
MORTERPLAS SBS FM 3 Kg is a waterproofing membrane, made of SBS elastomeric bitumen, reinforced with polyester felt (FP), and finished with a thermally bonded film on both the upper and lower side.
MORTERPLAS SBS FM 5 Kg MINERAL is a self-protected waterproofing membrane, made of SBS elastomeric bitumen, reinforced with polyester and fibre glass mesh (FM), and finished with a mineral protection on the upper side and...
MORTERPLAS SBS FP 4 KG is a waterproofing membrane that is not self-protected, made of SBS elastomeric bitumen, reinforced with high density polyester felt (FP), and finished with a thermally bonded film on both the upper...
MORTERPLAS SBS FP 4KG is a waterproofing membrane that is not self-protected, made of SBS elastomeric bitumen, reinforced with high density polyester felt (FP), and finished with a thermally bonded film on both the upper...
MORTERPLAS SBS FP-T 6 Kg MINERAL is a self-protected membrane, made of SBS elastomeric bitumen, reinforced with high density polyester felt (FP), and finished with a mineral protection on the upper side and a thermally bonded...
MORTERPLAS SBS FPV MIN 4 KG is a self-protected waterproofing membrane, made of SBS elastomeric bitumen, reinforced with reinforced and stabilized polyester felt (FP), and finished with a mineral protection on the upper side...
MORTERPLAS SBS FPV MIN 5KG: it is a self-protected waterproofing membrane, made of SBS elastomeric bitumen, reinforced with reinforced and stabilized polyester felt (FP), and finished with a mineral protection on the upper...
MORTERPLAS SBS FPV-S MIN is a self-protected, elastomeric SBS bitumen-based waterproofing membrane reinforced with high grammage polyester felt (FP), mineral finish on the upper side and thermofusible film on the undersi...
MORTERPLAS SBS FV is a non-self-protected membrane, made of SBS elastomeric bitumen, reinforced with fibre glass felt (FV), and finished with a thermally bonded or non-stick film with sand on both the upper and lower sid...
MORTERPLAS SBS FV is a non-self-protected membrane, made of SBS elastomeric bitumen, reinforced with fibre glass felt (FV), and finished with a thermally bonded or non-stick film with sand on both the upper and lower sid...
MORTERPLAS SBS FV MIN is a self-protected waterproofing membrane, made of SBS elastomeric bitumen, reinforced with fibre glass felt (FV), and finished with a mineral protection on the upper side and a thermally bonded film...
DATA PROTECTION
In cases where the user must provide data of a personal nature to TEXSA SYSTEMS SLU to use any of the Web services, the former will be expressly informed each time of the existence of an automated data base, the aim of same, those receiving the information and identity and address of the person responsible for data treatment, all with the aim of complying with that stipulated in Organic Law 15/1999 of 13th December, for the Protection of Data of a Personal Nature. To this effect, TEXSA SYSTEMS SLU shall reserve confidentiality of the data obtained and the users can exercise all rights to access, amendment, cancellation and any others referred to in aforementioned Organic Law 15/1999.
TEXSA SYSTEMS SLU has adopted all the necessary measures of a technical and organisational nature, to guarantee the security of the data of a personal nature, with the aim of preventing their alteration, loss, treatment or unauthorised access, in accordance with the requirements and conditions called for by Royal Decree 994/1999 of 11th June, in which the Regulation of safety measures of automated files containing data of a personal nature, is passed, notwithstanding the user's acceptance and knowledge that to date totally impregnable safety measures do not exist.
In case of doubt or the need to extend the information covering any of the above items, please do not hesitate to contact TEXSA SYSTEMS SLU.
TEXSA SYSTEMS SLU.
C/Ferro Nº7,
Polígono Industrial Can Pelegrí,
Castellbisbal
08755, Barcelona - Spain
NIF B66067687
Tel. (+34) 93 635 14 00
Fax (+34) 93 635 14 80
Email: lopd@texsa.com
texsa@texsa.com
Technical (+34) 93 635 14 22
